How to Fix a Wireless problem that Speed keeps on Changing

Interference of third-party devices and metal appliances can be a big reason for disaster that would create distances among all your wired and wireless devices. When a user buys a new device, they probably get worried about their Netgear Extender Setup. They go through manual steps but at last, get nothing because they do not know the actual steps to follow. WiFi Range Extender Setup does not require much botheration but your patience and support.

You just have to bring you new device in the same room where you have placed your existing one and just tie a knot between the both with the help of an Ethernet cable. Now, you can grab any of your smart devices and go to mywifiext, followed by a web browser.

This is the top-most local web address that is very useful and beneficial for your New Extender Setup on the behalf of Netgear Genie Setup. On priority, most of the people want a wireless device with a wireless network to travel along with them where ever they go and also to share and download heavy files, hotspot with other devices network.

Dealing with a public hotspot is quite straightforward, but you should be aware of intruders and protect your network from them. But before you proceed further, do you know the fact that your device must have a firewall security in-built or installed in it. This is specially designed for your network to keep them protected and away from hacking.

Most of the WiFi networks support assured maximum connection and data rates depending upon their configuration and setup. On the other hand, the speed of an Internet connection can mechanically be change anytime due to an extra smart feature like Dynamic Rate Scaling. When any device (wired or wireless) connects to a WiFi its rate speed is intended according to the current using signal and superiority of the connection.

WiFi dynamic rate scaling extends the range of the existing network from which devices can connect with each other in return for the longer distances and lower network performance. On the other hand, if you are tending to complete your WiFi Range Extender Setup, it also needs a close relation with your existing router. You cannot make this setup possible if you exceed the range of 20 feet between both the devices.

Steps to follow:

  1. Dynamic Rate Scaling/ 802.11b/g/n

Do you know the fact that 802.11g characterize the ratings from high to low?

  • 54Mbps
  • 48Mbps
  • 36Mbps
  • 24Mbps
  • 18Mbps
  • 12Mbps
  • 9Mbps
  • 6Mbps

On the other hand, old 802.11b devices support:

  • 11Mbps
  • 5Mbps
  • 2Mbps
  • 1Mbps

802.11g wireless devices in close immediacy to a router will frequently connect 54Mbps, this would be the maximum data rate displayed in the wireless configuration screen of all your smart devices.  Whereas, other 802.11g devices which are located pretty far away from your router can be the reason that causes the lowest rate. Well, when the devices are moved away from the router, their speed of the Internet connection as well as its rate automatically gets reduced and when the devices are placed nearby the router, the speed rating will increase the maximum i.e. 54Mbps.

Note: WiFi networking device have their own rates scaled and 802.11ac offers the maximum speed up to 1Gbps (1,000Mbps), though 802.11n gives out 1/3 at 300Mbps.

  1. Scheming the Dynamic Rate Scaling

 Factors that establish the data rate is vigorously chosen specially for a WiFi device which includes:

  • Space between all the WiFi communication points and other wireless devices.
  • Radio and metal, electronic interference that comes in the path of wireless devices, router, modem or the range extender.
  • Physical barriers like WiFi radio transmitter or a receiver are the biggest disaster in the field of signal quality.

Note: Each home network equipment always utilizes rate scaling.

More reason that results in a slow Internet service would be the antennas of your router that would be placed low or its antennas are pointed in the wrong directions. If you are living in a large house or a bungalow and if you are using a single router, you might want to buy a second one or just switch to WiFi Range Extender or a wireless repeater. Timely update your device, maybe all your wired, wireless, smart devices are anguish from an outdated device driver or firmware.

We will be happy to hear your thoughts

      Leave a reply